 |
1. EM TEST equipments |
 |
2. ESD simulator, model Dito
- CD mode – 500V to 10.0kV
- AD mode – 500V to 16.5kV
- Resolution – 100V steps
- Holding time – more than 5 seconds
- Polarity – positive, negative
|
 |
3. Multifunctional testgenerator for transients (EFT/burst, surge & power fail) up to 5.5kV, model UCS 500 N5 electrical fast transients
- Test voltage – 200V to 5.5kV
- Pulse share – 5/50ns
- Polarity – positive, negative
combination wave / surge
- Voltage (o.c.) – 160 V to 5.0kV
- Pulse front time – 1.2us
- Pulse time to half value – 50us
- Current (s.c.) – max. 2.5kA
- Pulse front time – 8us
- Pulse time to half value – 20us
- Pulsed magnetic field – 100, 300 and 1,000A/m
- Polarity – positive, negative
power fail, dips & interruptions, voltage variations
- AC voltage – max. 300V
- AC current – max. 16A
- DC voltage – max. 300V
- DC current – max. 10A
- 50/60Hz magnetic field – 1, 3, 10, 30, 100, 300 and 1,000A/m
|
 |
4. Continuous wave simulator, model CWS 500 CS1
- Output level – 1V - max. 30V (emf)
- Sinus (CW) – 100kHz to 300MHz
|
 |
5. Simulator for conducted, common-mode, disturbances, 0Hz (DC) to 150kHz, model IGV 16.1 continuous mode
- Test frequencies – DC, 50Hz
- Test level 1 – 1V continuous
- Test level 2 – 3V continuous
- Test level 3 – 10V continuous
- Test level 4 – 30V continuous
short-term mode
- Test frequencies – DC, 50Hz
- Test level 1 – 3V for 1s duration
- Test level 2 – 10V for 1s duration
- Test level 3 – 30V for 1s duration
- Test level 4 – 100V for 1s duration
15Hz to 150kHz
- Test frequencies – 15Hz to 150kHz
- Test level 1 – 1V - 0.1V - 1V
- Test level 2 – 3V - 0.3V - 3V
- Test level 3 – 10V - 1V - 10V
- Test level 4 – 30V - 3V - 30V
- Test level 5 – 30V - 10V - 30V
|
 |
6. EM clamp |
 |
7. Capacitive coupling clamp |
 |
8. Electrodynamic vibration systems, model ВСВ-250-445
- Frequency range – 2 to 2,700Hz
- Rated force – 50kN (sine), 30kN (random) and 100kN (shock)
- Max. acceleration – 100 g (sine and shock) and 50 g (random)
- Max. load – 800kg
- Armature mass – 50kg
|
 |
9. Compact ultra low temperature chamber, model MC-81
- Temperature range – -60 to +85ºС
- Inside dimensions – W400 x H400 x D400 mm
|
 |
10. Constant temperature & humidity chamber, model TH‑GU-300L
- Temperature range – -70 to +150ºС
- Humidity range – 20 to 98%
- Inside dimensions – W600 x H630 x D800 mm
|
 |
11. AC/DC/IR electrical safety tester, model GPI-825
- Output voltage – 100 to 5,000V (AC & DC)
- Trip current – 0.3 to 100mA
- Arc detection – 0.3 to 100mA
- Resistance range – 1 to 2,000MΩ (DC 500V / 1,000V)
|
 |
12. Megohmmeter, model ЦС0202-2
- Output voltage – 100 to 2500V
- Resistance range – 0.2 to 100,000MΩ
|
 |
13. The Jointed test finger of 12mm diameter. |
 |
14. Access probes:
- Sphere of 50mm diameter
- Sphere of 12.5mm diameter
- Test rod 2.5mm diameter
- Test wire 1.0mm diameter
|
 |
15. Area of tests for protection against water |
 |
16. Lighting discharge simulator
- Current (s.c.) – 1.2 to 40kA
- Pulse front time – 10us
- Pulse time to half value – 350us
|
|