Test equipment

	1. EM TEST equipments
	2. ESD simulator, model Dito CD mode – 500V to 10.0kV AD mode – 500V to 16.5kV Resolution – 100V steps Holding time – more than 5 seconds Polarity – positive, negative
	3. Multifunctional testgenerator for transients (EFT/burst, surge & power fail) up to 5.5kV, model UCS 500 N5 electrical fast transients Test voltage – 200V to 5.5kV Pulse share – 5/50ns Polarity – positive, negative combination wave / surge Voltage (o.c.) – 160 V to 5.0kV Pulse front time – 1.2us Pulse time to half value – 50us Current (s.c.) – max. 2.5kA Pulse front time – 8us Pulse time to half value – 20us Pulsed magnetic field – 100, 300 and 1,000A/m Polarity – positive, negative power fail, dips & interruptions, voltage variations AC voltage – max. 300V AC current – max. 16A DC voltage – max. 300V DC current – max. 10A 50/60Hz magnetic field – 1, 3, 10, 30, 100, 300 and 1,000A/m
	4. Continuous wave simulator, model CWS 500 CS1 Output level – 1V - max. 30V (emf) Sinus (CW) – 100kHz to 300MHz
	5. Simulator for conducted, common-mode, disturbances, 0Hz (DC) to 150kHz, model IGV 16.1 continuous mode Test frequencies – DC, 50Hz Test level 1 – 1V continuous Test level 2 – 3V continuous Test level 3 – 10V continuous Test level 4 – 30V continuous short-term mode Test frequencies – DC, 50Hz Test level 1 – 3V for 1s duration Test level 2 – 10V for 1s duration Test level 3 – 30V for 1s duration Test level 4 – 100V for 1s duration 15Hz to 150kHz Test frequencies – 15Hz to 150kHz Test level 1 – 1V - 0.1V - 1V Test level 2 – 3V - 0.3V - 3V Test level 3 – 10V - 1V - 10V Test level 4 – 30V - 3V - 30V Test level 5 – 30V - 10V - 30V
	6. EM clamp
	7. Capacitive coupling clamp
	8. Electrodynamic vibration systems, model ВСВ-250-445 Frequency range – 2 to 2,700Hz Rated force – 50kN (sine), 30kN (random) and 100kN (shock) Max. acceleration – 100 g (sine and shock) and 50 g (random) Max. load – 800kg Armature mass – 50kg
	9. Compact ultra low temperature chamber, model MC-81 Temperature range – -60 to +85ºС Inside dimensions – W400 x H400 x D400 mm
	10. Constant temperature & humidity chamber, model TH‑GU-300L Temperature range – -70 to +150ºС Humidity range – 20 to 98% Inside dimensions – W600 x H630 x D800 mm
	11. AC/DC/IR electrical safety tester, model GPI-825 Output voltage – 100 to 5,000V (AC & DC) Trip current – 0.3 to 100mA Arc detection – 0.3 to 100mA Resistance range – 1 to 2,000MΩ (DC 500V / 1,000V)
	12. Megohmmeter, model ЦС0202-2 Output voltage – 100 to 2500V Resistance range – 0.2 to 100,000MΩ
	13. The Jointed test finger of 12mm diameter.
	14. Access probes: Sphere of 50mm diameter Sphere of 12.5mm diameter Test rod 2.5mm diameter Test wire 1.0mm diameter
	15. Area of tests for protection against water
	16. Lighting discharge simulator Current (s.c.) – 1.2 to 40kA Pulse front time – 10us Pulse time to half value – 350us